top of page

MDR_Micro_A

[MDR_Micro_A] Features

  • 24GHz K-band radar

  • One board solution

  • Include antenna and DSP module

  • Small size / Low cost

  • Low power consumption

  • GPIO, UART or I2C(option) interface

  • Customer friendly output

  • Easily use

  • Replace PIR Sensor

[MDR_Micro_A] Applications

  • Lighting Control

  • Intrusion Detection

  • Indoor Automation

  • Movement Detection

  • Speed(with direction) Detection : Only Ver2.0

[MDR_Micro_A] Specification

 

  • Features

Project name

MDR_Micro_A

TX power

14 dBm

Interface

GPIO, UART

Hardware size

22.1 x 18.1 x 3.1mm

Antenna gain

8 dBi

Operating temperature

-30 ℃ ~ 85 ℃

Transmit frequency

24.15GHz

Antenna pattern (-3dB width)

Horizontal :100° , Vertical :100°

Storage temperature

-50 ℃ ~ 125 ℃

Channel

1 RX channel, 1 TX channel

Supply voltage / current

5 Vdc / 60 mA

  • Performance

Update rate

260 ~ 350ms

Velocity-Error

±0.5 km/h

Detect distance-Range

Person : 6m

Velocity-Range

0 ~ 50 km/h

Velocity-Resolution

0.5 km/h

[MDR_Micro_A] Dimension

[MDR_Micro_A]-Dimension.jpg

[MDR_Micro_A] Dimension

[MDR_Micro_A]-Antenna-Pattern(-3dB).jpg

[MDR_Micro_A] Pin Map

[MDR_Micro_A]-Pin-map.jpg

PIN 1 VCC 5V DC / Power +

PIN 2 :  GND / Power -

PIN 3 : GPIO_OUT1 / Motion detection status output

PIN 4 : N.C / Not Used

PIN 5 :  I2C1_SCL_USART1_TX / 

UART data transmit (TTL level : 3.3V)

PIN 6 :  I2C1_SCL_USART1_RX / 

UART data receive (TTL level : 3.3V)

PIN 7 :  N.C /  Not Used

PIN 8 : N.C /  Not Used

bottom of page